SHANGHAI PENGPU PD165Y-1 crawler bulldozer
Printer-friendly version
Download files:
Technical characteristics of Shanghai Pengpu PD165Y-1 crawler bulldozer
| Engine | |||||||
| Model | C6121ZG05C | Cummins NT855-C280 | |||||
| Type | Four-stroke, water cooling, straight vertical, direct injection type | Straight vertical, four-stroke, water cooling, PT pump injection, turbocharged | |||||
|
Flywheel power, kW |
122 | ||||||
|
Rated speed, r/min |
1850 | ||||||
| Number of cylinders - bore x stroke, mm | 6-ø121 x 152 | 6-ø140 x 152 | |||||
|
Starting method |
Electric starting motor 24V, 7.5kW | ||||||
| Battery | 24V (12V x 2), 195 AH | ||||||
|
Air cleaner |
Dry type, precleaned cyclone air cleaner | Dry type, precleaned paper element air cleaner | |||||
| Transmission | |||||||
| Torque converter | 3-element, stage, single-phase | ||||||
| Transmission | Hand-operated, hydraulic shift, planetary gear, multiple disc clutch, forced lubrication by gear pump | ||||||
| Bevel gear | Helical bevel gear, splash lubricated | ||||||
|
Steering clutch |
Wet, multiple disc, spring loaded, hand-operated with booster and hydraulic-released | ||||||
| Steering brake | Wet, band brake, operated with hydraulic booster | ||||||
|
Final drive |
Spur gear, double reduction, splash lubricated | ||||||
| Travel speed, km/h | |||||||
| Forward: | |||||||
| • 1st | 3.8 | ||||||
| • 2nd | 6.6 | ||||||
| • 3rd | 10.6 | ||||||
| reverse: | |||||||
| • 1st | 4.9 | ||||||
| • 2nd | 8.5 | ||||||
| • 3rd | 13.6 | ||||||
| Under carriage | |||||||
| Sprocket | Segmented | ||||||
| Track tension | Hydraulic-adjusted | ||||||
| Number of track shoes, each side | 6 (4 single, 2 double) | ||||||
| * Floating seals are used in all track rollers, carrier rollers, sprocket and front idlers | |||||||
| Track | |||||||
| Type | Sealed and lubricated single grouser | ||||||
| Track pitch, mm | 203 | ||||||
| Track width, mm | 560 | ||||||
| Number of track shoes, each side | 37 | ||||||
|
Lenghth of track on ground, mm |
2430 | ||||||
|
Ground clearance, mm |
400 | ||||||
|
Track gauge, mm |
1880 | ||||||
|
Ground pressure, MPa |
0.064 | ||||||
|
Hydraulic system of work equipment |
|||||||
|
Working pressure, MPa |
13.7 | ||||||
| Rated flow (at 2000 r/min), L/min | 250 | ||||||
| Pump | Double gear pump | ||||||
| Control valve | Hydraulic-operated, plunger, servo controlling | ||||||
|
Valve position |
Raise, hold. lower, float | ||||||
| Cylinder, Bore x Rod x Stroke, mm |
ø110 x ø65 x 1026 |
||||||
| Work equipment | |||||||
|
Staright blade |
Angle blade |
||||||
| Dimensions, Lenghth x Width x Height, mm | 4996 x 3416 x 3240 | 5185 x 4019 x 3240 | |||||
|
Weight, kg |
17860 | 17480 | |||||
| Blade dimensions, Width x Height, mm | 3416 x 1150 | 4050 x 1050 | |||||
|
Max. lift above ground, mm |
1090 | 1110 | |||||
|
Max. drop below ground, mm |
530 | 530 | |||||
| Pitch adjustment, ° | 55±2 | 55 | |||||
| Ripper | |||||||
| Type | 3 shank | ||||||
| Max. dig below ground, mm | 572 | ||||||
|
Max. lift above ground, mm |
492 | ||||||
Contact us for more information.
