HBXG (SHEHWA) SD6G crawler bulldozer
Printer-friendly version
Download files:
| Engine | ||||||||||
| Model | Caterpillar CAT C6121ZG05 | |||||||||
| Type | Water cooled, single line, vertical, four strokes, turbocharged, 6-cylinders | |||||||||
|
Flywheel power, kW |
131 | |||||||||
|
Rated speed, r/min |
1900 | |||||||||
| Number of cylinders - bore x stroke, mm | 6-ø121 x 152 | |||||||||
|
Starting method |
24V electric starting | |||||||||
| Battery | 24V | |||||||||
|
Transmission system |
||||||||||
| Torque converter | 3-element, 1-stage, 1-phase | |||||||||
| Transmission | Planetary gear, multiple disc, hydraulic actuated, forced lubrication | |||||||||
| Bevel gear | Helical gear, one reduction, splash lubricated | |||||||||
|
Steering clutch |
Wet, multiple-disc, hydraulically pressed, spring loaded | |||||||||
| Steering brake | Wet, band brake, operated with hydraulic booster and valve inner linkage | |||||||||
|
Final drive |
Spur gear, double reduction, splash lubricated | |||||||||
| Travel speed, km/h | ||||||||||
| Forward: | ||||||||||
| • 1st | 4.0 | |||||||||
| • 2nd | 6.9 | |||||||||
| • 3rd | 10.8 | |||||||||
| Reverse: | ||||||||||
| • 1st | 4.8 | |||||||||
| • 2nd | 8.4 | |||||||||
| • 3rd | 12.4 | |||||||||
| Under carriage | ||||||||||
| Sprocket | Segmented | |||||||||
| Track tension | Hydraulic-adjusted | |||||||||
| Number of track shoes, each side | 7 | |||||||||
| Number of carrier rollers, each side | 2 | |||||||||
| * Floating seals are used in all track rollers, carrier rollers, sprocket and front idlers | ||||||||||
| Track | ||||||||||
| Type | Sealed, lubricated single grouser | |||||||||
| Track pitch, mm | 205 | |||||||||
| Track width, mm | 560 | |||||||||
|
Lenghth of track on ground, mm |
2990 | |||||||||
|
Ground clearance, mm |
445 | |||||||||
|
Track gauge, mm |
1880 | |||||||||
|
Ground pressure, MPa |
0.055 | |||||||||
| Gradeability, ° | latitude 30° / transverse 25° | |||||||||
|
Hydraulic system of work equipment |
||||||||||
|
Working pressure, MPa |
15.5 | |||||||||
| Rated flow (at 2000 r/min), L/min | 178 | |||||||||
| Pump | Gear pump | |||||||||
|
Valve position |
Raise, hold, lower, float | |||||||||
|
Hydraulic systen pressure, MPa |
3.1 | |||||||||
|
Work equipment |
||||||||||
|
Blade type |
Straight tilt blade | |||||||||
|
Overall dimensions, Length x Width x Height, mm |
5037 х 3270 х 3077 | |||||||||
|
Weight (w/o ripper), kg |
16100 | |||||||||
|
Blade dimensions, Width x Height, mm |
3297 х 1170 | |||||||||
|
Max. lift above ground, mm |
— | |||||||||
| Max. drop below ground, mm | 592 | |||||||||
| Dozing capacity, m³ | 4.5 | |||||||||
| Ripper | ||||||||||
| Type | 1-shank | |||||||||
| Ripper's weight, kg | 4300 | |||||||||
| Volumes of liquids | ||||||||||
| Fuel tank, L | 295 | |||||||||
| Cooling system capacity, L | 38 | |||||||||
| Hydraulic system tank capacity, L | 100 | |||||||||
Contact us for more information.
Related materials:
